Tamiya 1/10 RC 47518 Mazda 787B Ship From Japan

[Drive a historic car that won the traditional endurance race] The traditional 24-hour endurance race "Le Mans" is held in France every June. This is an electric radio-controlled car assembly kit that reproduces the Mazda 787B, the machine that won the overall victory of the first Japanese car in the 1991 race. The low, wide and smooth body unique to Group C cars, which pursues aerodynamics, is realistically reproduced in polycarbonate. The rear wing and headlights are separate polycarbonate parts to tighten the details. In addition, the vivid coloring with a strong presence is painted green and orange, and finished with distinctive white dashed lines and stickers of many sponsor logos.

[Direct drive 2WD chassis that creates a sharp ride] The chassis is a composite type that combines an ABS resin bathtub frame as the main body, a resin space frame at the front and rear, and an FRP plate on the underside. The highly rigid frame structure helps the suspension move flexibly, creating sharp driving performance. The front suspension is a 3P type with independent kingpin coil springs, and the rear suspension is a 1.5mm thick FRP T-bar controlled by a CVA oil damper. The front height can be adjusted in two stages and the rear height can be adjusted in three stages to suit the road surface and tire wear. In addition, it uses a direct drive 2WD that transmits motor power directly to the spur gear. It is also equipped with a ball differential that operates smoothly and has a limited slip effect. Combined with the aerodynamic body, you can enjoy a sharp ride.

[Basic Specifications] ●Length 475mm, width 217mm, height 106mm ●Wheelbase 270mm ●Tire width/diameter = front 28/64mm, rear 45/68mm ●Frame = composite type that combines mainly bathtub type with space frames front and rear and FRP plate on the underside ●Drive system = horizontally-mounted motor, direct drive 2WD ●Differential gear = ball differential ●Steering = 2-piece tie-rod type ●Suspension = front independent kingpin and coil spring, rear 3P type with 1.5mm thick FRP T-bar controlled by CVA oil damper ●Gear ratio = kit standard (14T) 5.00:1 ●Motor = RS-540 sports tune ●Speed ​​controller = ESC specification (sold separately)